Frame & Sash Processing Equipment at GlassBuild

HAMOS

WRS window recycling systems for recycling of PVC window profiles, window off-cuts and post-consumer vinyl windows were highlighted by hamos GmbH Recycling and Separation Technologies. A combination of electrostatic separation systems remove rubber and flexible PVC gaskets as highly concentrated reject fractions, the company explains. Dust, wood, ferrous and non-ferrous particles and other contamination are separated from granulated rigid PVC as well.

49 8856 9261-42 | www.hamos.com

 

 

J&S Machine

Manufacturers can now bend vinyl and aluminum extrusions with one machine, the supplier states. Distributed by J&S Machine, the entire range of 3C Clomea bending machines can be supplied with heating elements, an electrical panel, and control console that enable the units to handle PVC. The control console allows the user to manage the air emission of the heaters and keep a consistent temperature during the bending process. Custom rollers are designed with high precision for each profile to minimize deformation of the work piece, the company states.

715/273-3376 | www.jsmachine.com

 

 
   
 

RAZORGAGE

The provider of automated positioning systems for cutting and drilling applications  demonstrated its Auto List cut list processing software. An option available on RazorGage products ranging from its Tablet PC-based automated stop through the fully-automated AutoPusher Saw System, the software can accept .CSV formatted output files produced on software from companies such as GDS, Athena, DeMichele Group and Optimumcut, the supplier explains. Display cut lists are displayed on the operator's touch screen after different materials are automatically sorted and organized. In addition, the software can either optimize a cutting solution by extrusion or facilitate cutting the pre-optimized solution to increase yields.

The company also showed its Android tablet-based entry level positioner designed to make operator entry of dimensions fast and simple for companies that do not have downloadable cut or drill list data.

503/656-9845 | www.razorgage.com

 

 

 

STÜRTZ

Recent introductions to the Stürtz Machinery line highlighted in Las Vegas included the Model SMI-MC-H-2K-3D Automated Twin Head Corner Cleaning System.  Long a staple in the automated segment of the supplier's line, the line provides capacity for more than 500 welded and cleaned squares in an eight-hour shift with just a single operator, it reports. With many standard cleaning tools, the base machine will clean most typical North American frame and sash profiles. Custom knives are available for slopes, bevels and radii. Programming is said to be intuitive and utilizes visual data to make the addition of new products a simple procedure. Maintenance software includes downtime alerts and reporting, preventative maintenance reminders and seamless remote diagnostics and upgrades.

 

The LinearPro fabrication saw features a high speed, linear motor driven feed system and can be outfitted for different cut configurations for sash, pocket sill or sloped sill requirements. The feed system eliminates backlash and provides accurate, repeatable tolerances not available in any other fabrication system on the market, the supplier notes. Custom fabrication requirements can be accommodated with fixed tools or with the Stürtz Flying Bridge. Unique maintenance features such as tilting tool carriages and laser tool breakage sensors with software interlocks are available on all machines in this series.

440/248 4009 | www.sturtz.com

 

 

View other products, components and equipment on display by category

 

Door & Window Hardware
including locks, latches, operators, multipoint systems, and levers, knobs and trimsets for residential products

Frame & Sash Materials
including vinyl extrusions, fiberglass pultrusions, cladding, reinforcements, finishes and laminates

Glass & IG Components
including spacers, spacer systems, IG sealants, muntins, grids, doorlites and decorative glass

Glass & IG Processing Equipment
including cutting tables and lines; IG ovens, presses and lines, tempering/laminating equipment and glazing equipment

Software & Systems
including ERP systems, manufacturing and production control packages, configurators, quoting and ordering packages, as well as specialized software tools

Weatherseals, Sealants & Related Products
including weatherstripping, gaskets, compression seals, jambliners, door sills, and flashing products 

Other Products & Services
including screen related products and equipment, packaging and shipping related materials and equipment, testing and design services, specialty fabrication services and more

Back to What's on Display in Las Vegas home page

Also, read our main show report, highlighting new introductions and trends at GlassBuild 2012.  Additional pages include Snapshots from GlassBuild with photos from exhibits around the floor and video coverage on our Live from GlassBuild page.