Latest Articles in Design & Performance

  • amd08thumb.jpg
    Orlando, Fla.—"We just have to get through this,” said one distributor attending the annual exhibition and convention of the Association of Millwork Distributors last week. That attitude was shared by many, expressing quiet determination to hold on for now and get prepared for better times when they do return. No one expects that time coming soon, and that was reflected in... more »
  • "I want a job like yours where I can get paid to write about what I did for my summer vacation," my son remarked. He was responding to my comments that I thought there were elements of Roman architecture, both ancient and medieval, that were relevant to today's development of U.S. building codes, and that I thought I would mention them in my next column for this magazine. We had just... more »
  • Most window and door manufacturers are interested in components that will give their products a higher end look, but most have to balance cost concerns as well. That's still true but hardware and extrusion suppliers at GlassBuild last week indicated more manufacturers are showing a real interest in adding components or developing complete new lines that offer an enhanced appearance... more »
  • This is a sidebar to the article A Manufacturer's Guide to IG Certification. What is ASTM E 2190? ASTM E 2190 was approved in 2002 as part of a continuing effort to harmonize North American standards for IG testing and performance. E 2190 is a standard specification for IG unit performance and evaluation designed to be equal to or improved over its predecessors ASTM E 774 (U.S.) and CGSB 12.8 (... more »
  • IMG_5144.jpg
    Attendance holds up well in weak economic environment
    Las Vegas—As the stock market tumbled, GlassBuild America: The Glass, Window & Door Expo, enjoyed a surprise success last week, as more than 8,000 attendees came to the convention center here. "All the exhibitors at the show were concerned about turnout this year given the down economy,” said Mike Hovan, president of Edgetech IG, one of the event’s largest exhibitors.... more »
  • This is a sidebar to the article A Manufacturer's Guide to IG Certification. Accelerated Aging: Laboratory conditions designed to recreate the normal aging process of IG units in a short period of time. ASTM E 2188: North American harmonized ASTM standard test method for IG unit durability performance testing. ASTM E 2189: North American harmonized ASTM standard test method for testing IG unit... more »
  • This is a sidebar to the article A Manufacturer's Guide to IG Certification. Associated Laboratories232 Wall StreetDallas, TX 75215Phone: 214/565-0593Fax: 214/565-1094 Insulating Glass Certification Council (IGCC)100 West Main StreetP.O. Box 730Sackets Harbor, N.Y. 13685Web:www.IGCC.org Email: staff@amscert.comPhone: 315/646-2234Fax:315/646-2297 Insulating Glass Manufacturers Alliance (IGMA)1500... more »
  • gbathumbnail.jpg
    Las Vegas—Despite challenging market conditions, window and door makers are coming to GlassBuild America, which finishes up today. Many attendees are here to find out what they need to do to get ready for new, more stringent Energy Star requirements, but many suppliers also note particularly strong interest in new products. Given the troubling economic news, there was definitely... more »
  • Las Vegas—Over 400 exhibitors have set up shop as GlassBuild America opens its doors for a three-day run at the Las Vegas Convention Center here. Glass and IG component suppliers, hardware producers, vinyl extruders and equipment manufacturers supplying the window and door industry will be showcasing a variety of products on the floor. To view a slide show offering a first look at what... more »
  • San Antonio, Texas—The American Architectural Manufacturers Association conducted its national fall conference here this week, focusing on the outcomes of the International Code Committee’s final hearings and keeping momentum in the green building movement. Julie Ruth, fresh off the ICC final action hearings, gave AAMA members an update on what proposals were approved or got... more »