SmartBlox 2.0 setting blocks for glazing shim applications are compatible with various glazing sealants and systems. Unlike rigid setting blocks, 85 durometer SmartBlox 2.0 material provides a flexible cushion for insulating glass units, protects the glass from impacts and stress cracks by allowing for thermal expansion and contraction, promotes drainage and protects the IG seal from any water that might enter the glazing pocket, and supports dead load.

H.B. Fuller’s Ködispace 4SG Warm Edge Spacer System is a reactive thermoplastic spacer system characterized by high energy efficiency, superior gas retention, and an automated process resulting in more precise spacer placement. The invisible thermoplastic spacer system ultimately results in a more visually appealing insulating glass, creating a harmonious connection between glass and frame. Additionally, the auto-adjusting application provides unparalleled flexible design freedom and triple-glazing manufacturing precision.

H.B. Fuller’s Ködispace 4SG Warm Edge Spacer System is a reactive thermoplastic spacer system characterized by high energy efficiency, superior gas retention, and an automated process resulting in more precise spacer placement. The invisible thermoplastic spacer system ultimately results in a more visually appealing insulating glass, creating a harmonious connection between glass and frame. Additionally, the auto-adjusting application provides unparalleled flexible design freedom and triple-glazing manufacturing precision.

H.B. Fuller’s Ködispace 4SG Warm Edge Spacer System is a reactive thermoplastic spacer system characterized by high energy efficiency, superior gas retention, and an automated process resulting in more precise spacer placement. The invisible thermoplastic spacer system ultimately results in a more visually appealing insulating glass, creating a harmonious connection between glass and frame. Additionally, the auto-adjusting application provides unparalleled flexible design freedom and triple-glazing manufacturing precision.

The CX series seal from Coda is a foam-filled bulb seal with a rigid carrier design to aid in easy installation into vinyl profiles, as well as the ability to wrap a window after it has been welded. With Coda's patented installation process, operators can easily "roll" the bulb seal into a sash or frame with minimal effort and be sure the seal is installed securely and at the correct depth into the kerf slot.

The CX series seal from Coda is a foam-filled bulb seal with a rigid carrier design to aid in easy installation into vinyl profiles, as well as the ability to wrap a window after it has been welded. With Coda's patented installation process, operators can easily "roll" the bulb seal into a sash or frame with minimal effort and be sure the seal is installed securely and at the correct depth into the kerf slot.

The CX series seal from Coda is a foam-filled bulb seal with a rigid carrier design to aid in easy installation into vinyl profiles, as well as the ability to wrap a window after it has been welded. With Coda's patented installation process, operators can easily "roll" the bulb seal into a sash or frame with minimal effort and be sure the seal is installed securely and at the correct depth into the kerf slot.

ADSEAL PRODUCTION 4550 is a single component moisture curing neutral cure silicone with excellent elasticity. This silicone is specially designed for window manufacturing. It has outstanding adhesion on most PVC (flexible and rigid) and anodized aluminium. It bonds very well to most paints, glass, wood, and fiber reinforced plastic (FRP). It cures fast, thereby increasing your production speed. It is easy to apply with a manual or pneumatic gun (cartridge or sausage) or pneumatic pump (5-gallon pail or 55-gallon drum). It has low volatile organic compounds (V.O.C.) and little odor. ADSEAL PRODUCTION 4550 adhesive sealants are resistant to permanent temperatures from -40°C to 232°C (-40°F to 450°F) and intermittent temperatures from -51°C to 260°C (-60°F to 500°F). It meets the following standards: 

• ASTM C920, Type S, Grade NS, Class 50, Use M, G, A, O 

• AAMA 802.3, 803.3 and 805.2 

• Meets ASTM E84 / UL 723 (flame spread index = 0 / smoke development index = 20) 

ADSEAL PRODUCTION 4550 is a single component moisture curing neutral cure silicone with excellent elasticity. This silicone is specially designed for window manufacturing. It has outstanding adhesion on most PVC (flexible and rigid) and anodized aluminium. It bonds very well to most paints, glass, wood, and fiber reinforced plastic (FRP). It cures fast, thereby increasing your production speed. It is easy to apply with a manual or pneumatic gun (cartridge or sausage) or pneumatic pump (5-gallon pail or 55-gallon drum). It has low volatile organic compounds (V.O.C.) and little odor. ADSEAL PRODUCTION 4550 adhesive sealants are resistant to permanent temperatures from -40°C to 232°C (-40°F to 450°F) and intermittent temperatures from -51°C to 260°C (-60°F to 500°F). It meets the following standards: 

• ASTM C920, Type S, Grade NS, Class 50, Use M, G, A, O 

• AAMA 802.3, 803.3 and 805.2 

• Meets ASTM E84 / UL 723 (flame spread index = 0 / smoke development index = 20) 

ADSEAL PRODUCTION 4550 is a single component moisture curing neutral cure silicone with excellent elasticity. This silicone is specially designed for window manufacturing. It has outstanding adhesion on most PVC (flexible and rigid) and anodized aluminium. It bonds very well to most paints, glass, wood, and fiber reinforced plastic (FRP). It cures fast, thereby increasing your production speed. It is easy to apply with a manual or pneumatic gun (cartridge or sausage) or pneumatic pump (5-gallon pail or 55-gallon drum). It has low volatile organic compounds (V.O.C.) and little odor. ADSEAL PRODUCTION 4550 adhesive sealants are resistant to permanent temperatures from -40°C to 232°C (-40°F to 450°F) and intermittent temperatures from -51°C to 260°C (-60°F to 500°F). It meets the following standards: 

• ASTM C920, Type S, Grade NS, Class 50, Use M, G, A, O 

• AAMA 802.3, 803.3 and 805.2 

• Meets ASTM E84 / UL 723 (flame spread index = 0 / smoke development index = 20)